hunter pro c

A manual back-up utility that stores complete controller scheduling and setup information in back-up memory.

How do I manually run Hunter Pro-C sprinkler system?

Hunter controllers allow you to start a station or an entire program manually. To do so, turn the dial to Manual Single Station or Manual All Stations, verify that the stations that you want to activate have run time, and turn the dial back to the Run position.

Why is my Hunter irrigation system not working?

The most common reason your sprinklers are not watering is because the rain sensor is active. Do you have a rain sensor on your sprinkler system? If so, slide your sensor bypass switch into the “BYPASS” position (on an SRC, turn the dial into the RUN (Bypass Sensor position).

How do you wire Hunter Pro C?

Pro-C – Connecting Station Wires
Route valve wires between control valve location and controller.At valves, attach a common wire to either solenoid wire of all valves. Route valve wires through the conduit and attach conduit to one of the openings on the bottom of the cabinet.

Is Hunter Pro C a smart controller?

With the revolutionary Solar Sync sensor, the Pro-C is converted into a “smart controller”, which regulates irrigation runtimes based on locally measured weather. Pro-C is also compatible with Hunter remotes for quick, wireless irrigation activation.

What is Hunter Solar Sync?

The Solar Sync ET sensor is an advanced weather sensor that calculates evapotranspiration (ET) and adjusts Hunter controllers daily based on local weather conditions. Solar Sync measures sunlight and temperature, and uses ET to determine the correct seasonal adjustment percentage value to send to the controller.

How does a Hunter rain sensor work?

They have a series of porous cork discs that when they get wet from rain, they expand and force the sensor to prevent the controller from watering. After the cork discs dry out, the sensor will let the controller know that it is dry and the controller can resume with its programmed watering schedule.

How do I test my Hunter Pro C sprinkler system?

To initiate the test program:
Press and hold the PRG button. The station number will be flashing.Press the or button to scroll to the station you would like the test program to start with. Use the and buttons to set a run time of up to 15 minutes. After a 2 second pause, the test program will begin.

How do I start Hunter Pro C in Spring?

Spring Start-Up Checklist
Open the system main water valve slowly to allow pipes to fill with water gradually. Verify the proper operation of each station valve by manually activating all zones from the controller.Walk through each station on the controller, checking for proper operation of the zone.

How do I turn on my Hunter Pro C water system?

Make sure the valve is operating normally by turning the solenoid 1/2″ turn counter-clockwise. Turning the solenoid will turn the valve on manually. Turn the solenoid clockwise until snug to turn off the valve. If the valve will not turn on manually, check the water supply to the valve.

Why would sprinkler system not turn on?

When the sprinkler zones do not turn on at all, it is generally a problem with the electrical signals running from the controller to the valve solenoids. More rarely, it is caused by a faulty valve that needs to be rebuilt or replaced.

Why won’t my sprinklers start?

Here are some common reasons why your sprinkler system won’t turn on: Lawn sprinkler control timer isn’t working correctly. Clogged or dirty sprinkler heads. Broken sprinkler heads.

Is there an app for Hunter sprinkler system?

Control your Hunter irrigation system(s) remotely using this app or using a web browser from anywhere in the world (note: internet access required). This app requires a valid account at http://hydrawise.com. An account is free.

ncG1vNJzZmivp6x7or%2FKZp2oql2esaatjZympmenna61ecOonKxlmKq7tbHRZqerp12YeqW7jJyfnpubYra1ec6uq2agpaPBpr6MqamoZZNk