fence post depth chart

June 17, 2023

Project Instructions

Dig post hole so diameter of the hole is 3 times the width of the post (i.e., the hole for a 4” wood post should be about 12 inches wide). The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).

How deep should an 8 foot post be in the ground?

For an average fence post, about 6 to 8 feet tall, prepare to dig a post hole about 2 feet deep. To install a fence post, you’ll need a shovel or post digger, a 6-foot level, soil, and gravel or crushed stone.

How deep should a 5ft fence post be?

Lawsons experts recommend you should dig a hole which has a depth of 2 ft (24 in / 600mm) to ensure you have a stable timber or concrete fence post.

How deep should a 2 foot post be in the ground?

As a general rule of thumb, you’ll need to place at least 1/3 the height of the post in the ground. For example, a 6-foot tall fence will need at least 2 feet of post in the ground. Consider the frost line in your area.

How tall should a 6 foot fence be?

Post lengths for fences start at 8 or 10 feet for a 6-foot-tall fence. They are commonly four-by-fours, which measure approximately 3 1/2 by 3 1/2 inches, or six-by-sixes, at around 5 1/2 by 5 1/2 inches.

How many bags of concrete do I need to set a fence post?

1 – 4 bags of concrete per fence post are typically what’s needed. This depends on the type of soil, fence design, height, post size and bag weight. In general the depth of the post’s hole needs to be 1/3 to 1/2 of the above ground height of the post.

Should wooden fence posts be set in concrete?

First rule, gang: Do not set wooden posts in concrete. Look, no matter what preventative steps you take (and I’ll get to those), eventually wooden posts rot, and eventually you’ll have to set new ones. Not only does burying them in concrete make for more work down the line, it actually can speed up the rotting.

What size Post do you use for an 8 foot fence?

A common rule of thumb, is to dig the hole 3 times as large as the post, and to a depth of 1/3-1/2 of the post height above ground. so for a 8′ high fence, using 4×4 posts. dig the holes 12″ in diameter, to a depth of 2 1/2 – 4′. Of course, that’s assuming you’re setting the posts in concrete.

How deep should a 10 foot fence post be?

The general rule of thumb when setting a post is that the depth of the post’s hole needs to be one-third to one-half of the actual above-ground height of the post. So, a six-foot-high finished post ideally needs to be buried three feet into the ground.

How big of a hole do you need for a 4×4 post?

The diameter of your post hole should be three times the diameter of your post. So, if you’re planning on using a four-inch round or 4×4-inch square post, your post hole will need to be 12 inches in diameter. For a six-foot-high fence post, we would need a hole that’s 36 inches deep and 12 inches in diameter.

Does a 2m high fence need planning permission?

You will need to apply for planning permission if you wish to erect or add to a fence, wall or gate where: it would be over 1 metre high and fronting a road used by vehicles (or the footpath of such a road) or over 2 metres high elsewhere.

Can you put dry concrete in a post hole?

Fast-setting concrete is ideal for setting posts because there’s no mixing—you simply pour the dry concrete from the bag right into the hole, then add water.

How do you level a fence post height?

Once your posts are set in concrete, you will figure out where the top of your fence will be on the posts. The easiest way to do this is to find the lowest height post and then mark the other posts to be cut down to that level. Mark where you need to cut with a pencil. Now you can install your fence.

How do I put a post in the ground without concrete?

Procedure:
Find a concrete surface and lightly tamp your digging iron against it. Remove the turf and topsoil from the site of the post. Dig the hole putting the displaced earth onto the tarp. Pour 4 inches of gravel into the hole.Place the post in the hole. Add another 2 inches of gravel around the base of the post.

What is the legal height of a fence between Neighbours?

The laws actually state that a fence can be as high as 100 meters. However, this is only allowed if proper planning permits have been obtained. This means that any fence under 2 meters in height does not require a permit. This simple law has a few complications to it.

What size fence post do I need for 6ft fence?

Calculate the post lengths

If you’re setting wooden or concrete posts in concrete you’ll need 8ft (2.4m) posts for a 6ft (1.828m) fence – i.e. your posts are 2ft (0.6m) longer than the fence height. Use 4in x 4in posts for fences of 5ft and over and 3in x 3in posts for anything under 5ft.

What size is a standard fence post?

The lumber industry defines standard wood post sizes as 4×4 or 6×6. The outside dimensions of the standard 4×4 measure 3-1/2″ x 3-1/2″, and the outside dimensions of the standard 6×6 measure 5-1/2″ x 5-1/2″.

How deep should an 8 foot post be in the ground?

How many bags of concrete do I need to set a fence post?

How big of a hole do you need for a 4×4 post?

What is the legal height of a fence between Neighbours?

Recommended Posts