builder board
Builder Board™ Heavy-duty floor protection designed for commercial and residential contractors. Builder Board replaces the need for large, bulky sheets of masonite and rolls out flat. Protect floors from spills, drops and more.
What is Builder board made of?
The boards are made of super high quality 1/2″ exterior-grade birch plywood, sanded perfectly smooth to the touch, with the option of a durable non-toxic finish for inside or outside.
What is RAM board made of?
Ram Board is made of 100% reclaimed paper, which contains a minimum of 90% postconsumer material. Ram Board is committed to being good stewards of the environment. We have met the high standards of the FSC® certification process and have been approved by the Scientific Certification System.
How do I protect my floor during construction?
5 Ways to Protect Flooring During Construction and Renovation
Use Temporary Floor Coverings. Apply Painter’s Tape to Non-Adhesive Floor Coverings. Determine Walking Routes. Keep the Site Clean and Well Ventilated. Seal the Rest of the Room.
Can you use RAM board on carpet?
While most Ram Board projects do include plastic materials, masonite is made of wood fibers and other recycled materials. There are several options that are great for protecting carpets, vinyl, and other hard surfaces that may not sit well underneath a masonite-like material.
Is Ramboard reusable?
Ram Board is breathable, which can allow floors to cure and breathe while being protected. It is also durable, meaning it can handle forklift and scissor lift traffic easily. It is reusable – once you’re done with a job, roll it back up.
Is RAM board any good?
Ram Board is usually one of the top rated floor surface protection products out there. It’s temporary, but heavy duty while it’s down and specifically designed for contractors. It can be installed quickly and can also be re-used, cutting down on costs and how much time contractors need to spend putting it down.
What side is up for Ram Board?
Ram Board’s best practices recommend installing the product with logo side up. This allows the board to lay out and install the quickest. Simply lay roll on the ground, roll out to desired length, and cut. To cut, roll Ram Board away from floor or surface, cut, and lay back into place.
Can I paint Ram Board?
Just as Ram Board provides durable floor protection on commercial job sites, you can trust Painter’s Board to stand up to the most strenuous painting conditions. For years, professional painters and DIY consumers have used red rosin paper to protect floors while painting.
Can you vacuum Ram Board?
To re-use, sweep or vacuum all dirt and debris off surface of Ram Board and roll up.
Is it better to paint or do floors first?
Most people think that painting should be done first to prevent any spills from marring brand-new flooring. However, experts agree that new flooring should always be installed before you have any interior painting done.
How can I protect my walls during construction?
Seal Off With Plastic
Completely seal the top and sides with tape to create a dust barrier. Taping to walls is usually easier than taping to woodwork. If you can’t seal the bottom edge with tape, lay a board across it. Light plastic (1 mil or so) is fine for most jobs.
How do you protect new concrete during construction?
Pro-Tips for polished concrete floor protection
Never cover a slab that hasn’t cured for at least 28 days.If the floors were polished before framing, wait until the house is dried in to cover the floor. Always cover the floor with a product durable enough to last through the entire construction process.
ncG1vNJzZmivp6x7or%2FKZp2oql2esaatjZympmenna61ecisZJutmaGxpr6Mm6aaqpRiwrSxw2adqKpdmLWmr8pmoK1ln6rBbq7UoqOdnaJir7Ct0Z1m